Page 1 of 1
MULTICHARTS 9.1 BETA 1
Posted: Jul 06 2015
by Henry MultiСharts
This version introduces a number of long-awaited features implemented in response to numerous user feature requests.
Local broker simulation, Forex board, Volume Profile in DOM window, multibroker trading performance summary and the ability to export only selected Trading Performance Report segments are only just a few highlights of the new features and improvements list. Currency conversion algorithm has been improved and Realized PnL is now available for the majority of supported brokers. We also added the possibility to set trailing stop, profit target and other special orders parameters in ticks for auto trading.
Learn more here
Download MultiCharts 9.1 Beta 1
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 07 2015
by AlphaCat
Hello,
any ETA on the .net version for this?
Regards,
A.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 07 2015
by Henry MultiСharts
Hello AlphaCat,
MultiCharts .NET 9.1 Beta 1 can be expected within a week.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 07 2015
by ABC
Hello AlphaCat,
MultiCharts .NET 9.1 Beta 1 can be expected within a week.
Will this Beta bring the ability to export protected studies out of MC.NET like you added to the free MC.NET?
Thank you,
ABC
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 07 2015
by SP
I have set the "Unrealized Profit Calculation Mode" to "Get from IB". The new PnL on the right shows the correct number (€+8,89) but the bottom value is wrong (€3,89).
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 07 2015
by Henry MultiСharts
Hello AlphaCat,
MultiCharts .NET 9.1 Beta 1 can be expected within a week.
Will this Beta bring the ability to export protected studies out of MC.NET like you added to the free MC.NET?
Thank you,
ABC
Hello ABC,
At the moment this functionality is exclusive to free MC.NET.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 07 2015
by Henry MultiСharts
I have set the "Unrealized Profit Calculation Mode" to "Get from IB". The new PnL on the right shows the correct number (€+8,89) but the bottom value is wrong (€3,89).
Hello SP,
The DOM's Volume Profile PnL values are calculated by MultiCharts. When you use "Get from TWS" (single accounts only)" mode the PnL is streamed by IB API, the PnL values in MultiCharts (excluding VP in DOM) should match TWS Accounts window.
If you want the DOM's Volume Profile PnL values to match the other PnL values - you need to have all PnL values calculated by MultiCharts in "By best bid & best ask" mode. This mode requires realtime data subscription on your broker account for calculation. Here is
how to set it up.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 08 2015
by arnie
Oh lord, you still didn't changed the way MC quote treasuries?
I thought 9.1 would finally remove that annoying and unnecessary "/32" quote.
You guys are the only ones that quote treasuries this way.
All brokers, all charts platforms use the simple quote 127'125 or even 127.125 but you guys continue to stick with 127 12.5/32.
Developers might think this is an important thing to see but it's not necessary, it's distracting, occupies unnecessary space on the price scale, the DOM and the T&S can be a mess by quoting this way and people might even become confused because they look at their broker platform and see the quotes in one way and then look at MC and there's another.
![Image](http://www.multicharts.com/discussion/download/file.php?id=9001)
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 08 2015
by arnie
Why is the PnL part of the volume profile option? I don't know about you but having the PnL side by side with the DOM can be quite distracting. One becomes more preoccupied with his PnL than manage his trade.
It would be preferable to have a separate option for it. They are two very different things.
Also, please consider to have the volume text justified and not in a zig-zag way which does not facilitate its reading.
The best way would be to put the volume text inside the PnL column.
![Image](http://www.multicharts.com/discussion/download/file.php?id=9002)
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 08 2015
by arnie
Tried the new simulator broker, AWESOME!
I noticed something that has been happening for the last couple of versions.
While charts and DOM shows the quotes in 32's, OPT and the Place Order window show the quotes in 64's.
![Image](http://www.multicharts.com/discussion/download/file.php?id=9004)
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 08 2015
by arnie
Just for reassurance, the option to extend the rectangle to the right is still confirmed for 9.1 version, right?
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 08 2015
by KhaosTrader
I like having the P&L on the DOM, its very nice.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 08 2015
by arnie
I like having the P&L on the DOM, its very nice.
Sure, no problem, hence its own option to switch it ON/OFF.
It makes no sense having the PnL and the profile together. They are completely unrelated.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 09 2015
by CrazyNasdaq
Please, Which is the keyboard shortcut to recenter the DOM ? I haven't found it
Thanks in advance
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 09 2015
by arnie
Please, Which is the keyboard shortcut to recenter the DOM ? I haven't found it
Thanks in advance
It's in the General category, not in the DOM category. Probably it should be replaced.
It's called DOM Auto Centering
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 09 2015
by CrazyNasdaq
Please, Which is the keyboard shortcut to recenter the DOM ? I haven't found it
Thanks in advance
It's in the General category, not in the DOM. Probably it should be replaced.
It's called DOM Auto Centering
No it's written in the 11th MORE IMPORTANT features of this release
• Added keyboard shortcut to center last price in DOM. Learn more:
https://www.multicharts.com/pm/viewissu ... no=MC-1650
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 09 2015
by arnie
Here's something interesting, while the DOM high and low for the day read the entire day, globex + cash session, the volume profile only reads the cash session.
I like the idea of having an option for us to set what session template to apply to the volume profile in the DOM but where is that option if I want to see the entire day?
![Image](http://www.multicharts.com/discussion/download/file.php?id=9010)
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 09 2015
by arnie
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 10 2015
by Henry MultiСharts
Tried the new simulator broker, AWESOME!
I noticed something that has been happening for the last couple of versions.
While charts and DOM shows the quotes in 32's, OPT and the Place Order window show the quotes in 64's.
This issue has been confirmed. The fix is targeted to MultiCharts 9.1 Beta 2.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 10 2015
by Henry MultiСharts
Just for reassurance, the option to extend the rectangle to the right is still confirmed for 9.1 version, right?
This is the one in the "What's New":
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 10 2015
by Henry MultiСharts
Oh lord, you still didn't changed the way MC quote treasuries?
I thought 9.1 would finally remove that annoying and unnecessary "/32" quote.
You guys are the only ones that quote treasuries this way.
All brokers, all charts platforms use the simple quote 127'125 or even 127.125 but you guys continue to stick with 127 12.5/32.
Developers might think this is an important thing to see but it's not necessary, it's distracting, occupies unnecessary space on the price scale, the DOM and the T&S can be a mess by quoting this way and people might even become confused because they look at their broker platform and see the quotes in one way and then look at MC and there's another.
Why is the PnL part of the volume profile option? I don't know about you but having the PnL side by side with the DOM can be quite distracting. One becomes more preoccupied with his PnL than manage his trade.
It would be preferable to have a separate option for it. They are two very different things.
Also, please consider to have the volume text justified and not in a zig-zag way which does not facilitate its reading.
The best way would be to put the volume text inside the PnL column.
This is something we are considering to improve. An update is to follow.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 11 2015
by waldem
hallo team, i've noticed that in GV included on new version does not exist any more the keywords: GVSetNamedDouble - GVGetNamedDouble.
since i have one strategy with this i have integrated from old GV 2.2.
it is something that you know?
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 11 2015
by TJ
hallo team, i've noticed that in GV included on new version does not exist any more the keywords: GVSetNamedDouble - GVGetNamedDouble.
since i have one strategy with this i have integrated from old GV 2.2.
it is something that you know?
Please see this thread:
viewtopic.php?f=1&t=48711
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 11 2015
by arnie
This is the one in the "What's New":
When I requested the right extension I was looking for something like we have in the Equidistant Channel
otherwise we need to go, every day, to every single rectangle we have in the charts, access its properties, one by one, and move forward the End Date.
I use the rectangle to extend important volume price areas into the future so I can have price areas that are extended for days or weeks. It's quite painful to have to access each one of their properties to move the end date forward so they can continually be extended.
This would be very easily fixed by having the same option already available in the equidistant channel tool.
I got really thrilled when I saw that you would finally make this available but it seems that you've only fixed that annoying rectangle resize on each new coming tick, which is great because it was really annoying but not having the option to extend it to the right... man, what a buzzkill
![Sad :(](./images/smilies/icon_sad.gif)
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 12 2015
by CrazyNasdaq
There are still some problems with Custom Futures based on Volume days of Roll Over
With CQG datafeed there is a jump in historical datafeed from March to second decade of june on DAX futures and Eurostoxx50 futures if ROLL OVER conditions is set to Volume days.
If ROLL OVER conditions is set on calendar days the historical data does not present any jump.
ROLL OVER conditions set on Volume days
ROLL OVER conditions set on calendar days
These problems were not present on Multicharts 9.0 official
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 13 2015
by CrazyNasdaq
There are still some problems with Custom Futures based on Volume days of Roll Over
With CQG datafeed there is a jump in historical datafeed from March to second decade of june on DAX futures and Eurostoxx50 futures if ROLL OVER conditions is set to Volume days.
If ROLL OVER conditions is set on calendar days the historical data does not present any jump.
....
These problems were not present on Multicharts 9.0 official
Same problems with IQFeed datafeed custom futures set on Volume days ROLL OVER
![Image](http://i58.tinypic.com/2jtr1u.png)
Re: Demo Data from AMP in MULTICHARTS 9.1 BETA 1
Posted: Jul 13 2015
by swisstrader
Demo data access from AMP does not work with MC64 v9.1 beta1.
[07/13/2015 09:45:15] Establishing connection to CQG: Datafeed Version= 1.0.11373.201
[07/13/2015 09:45:17] Error message: Logon failed: Trader is not enabled to use WebApiTest client application. Please contact your FCM.
[07/13/2015 09:45:17] Lost connection to Data Network.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 14 2015
by CrazyNasdaq
In Multicharts 9.1 beta 1 there is a new very annoying behaviour which affects the STATUS ON/OFF of an indicator when you switch form STATUS ON to STATUS OFF.
If the indicator is in the subchart#1 and you switch the indicator to STATUS OFF, the indicator disappears as it should be. But when you try to switch it again to STATUS ON, the indicator becomes active but is set in the subchart "hidden" and you have to reset it (or each one if you have more than one), to the previous subchart which becomes very annoying and keeps too much time
I don't like this behaviour at all !!!!
Watch the video in the link attached
http://it.tinypic.com/r/241jy1c/8
https://vid.me/PBZE
Re: Demo Data from AMP in MULTICHARTS 9.1 BETA 1
Posted: Jul 14 2015
by Henry MultiСharts
Demo data access from AMP does not work with MC64 v9.1 beta1.
[07/13/2015 09:45:15] Establishing connection to CQG: Datafeed Version= 1.0.11373.201
[07/13/2015 09:45:17] Error message: Logon failed: Trader is not enabled to use WebApiTest client application. Please contact your FCM.
[07/13/2015 09:45:17] Lost connection to Data Network.
Hello swisstrader,
Since MultiCharts 9.1 beta 1 CQG connection works via WebApi.
Old
demo accounts created for COM API (which was used previously) will not work.
You need to contact your broker and request a new WebApi demo account.
Live accounts should work OK without any additional adjustments.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 15 2015
by Henry MultiСharts
In Multicharts 9.1 beta 1 there is a new very annoying behaviour which affects the STATUS ON/OFF of an indicator when you switch form STATUS ON to STATUS OFF.
If the indicator is in the subchart#1 and you switch the indicator to STATUS OFF, the indicator disappears as it should be. But when you try to switch it again to STATUS ON, the indicator becomes active but is set in the subchart "hidden" and you have to reset it (or each one if you have more than one), to the previous subchart which becomes very annoying and keeps too much time
I don't like this behaviour at all !!!!
Watch the video in the link attached
http://it.tinypic.com/r/241jy1c/8
https://vid.me/PBZE
Hello CrazyNasdaq,
This issue has been confirmed. The fix is targeted to MultiCharts 9.1 Beta 2.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 15 2015
by arnie
I love the DOM center keyboard shortcut, especially the ability it has to center all open DOM's at the same time. It's a beautiful thing to watch
The same way we have that horizontal line in the DOM that marks the high and low for the day, is it possible to have it also to mark the center of the DOM?
It would be nice to have such line (with a different color) so we can easily see how prices move up or down since last center.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 15 2015
by mickatrade
Hello,
I'm a discretionary trader of US stocks (IB broker) and i use chart trading in order to move stop loss and take profit orders.
The issue is these orders are over the candleticks so i can't see them.Can you add the possibility to move orders on the left of charts ?
It would be i great feature.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 15 2015
by TJ
Hello,
I'm a discretionary trader of US stocks (IB broker) and i use chart trading in order to move stop loss and take profit orders.
The issue is these orders are over the candleticks so i can't see them.Can you add the possibility to move orders on the left of charts ?
It would be i great feature.
You can adjust the offset.
Right click on the Trade Panel,
Select
Format Chart Trading,
Look under
Active Orders and Position tab,
Adjust
Connecting Line Length.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 15 2015
by mickatrade
Yeah but i don't have time to change chart property while scalping, i just want to focus on my trade.
And i think active orders would be less annoying if they were on the left of the chart ( it's the past !).
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 15 2015
by TJ
Yeah but i don't have time to change chart property while scalping, i just want to focus on my trade.
And i think active orders would be less annoying if they were on the left of the chart ( it's the past !).
This is the version 9 of MultiCharts,
and you talk as if you are the first user.
![Image](http://www.multicharts.com/discussion/download/file.php?id=9020)
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 15 2015
by mickatrade
that s what i was looking for, thank you .
live support told me it wasn t possible to move it on the left.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 16 2015
by Henry MultiСharts
There are still some problems with Custom Futures based on Volume days of Roll Over
With CQG datafeed there is a jump in historical datafeed from March to second decade of june on DAX futures and Eurostoxx50 futures if ROLL OVER conditions is set to Volume days.
If ROLL OVER conditions is set on calendar days the historical data does not present any jump.
ROLL OVER conditions set on Volume days
ROLL OVER conditions set on calendar days
These problems were not present on Multicharts 9.0 official
Same problems with IQFeed datafeed custom futures set on Volume days ROLL OVER
Hello CrazyNasdaq,
In order to study this case please provide the following information:
- workspace you are using (both CQG and IQFeed);
- in QuoteManager right click on the custom futures->Export instruments (with data, including futures CF is built on)->export minute and daily data. Please export both CQG and IQFeed Custom futures;
- screenshot of CQG data feed settings (QuoteManager->Tools->Data sources->CQG->Settings.
- specify the time zone of your PC.
If the file size is >10 mb please upload it to any file sharing hosting and send me the download link to
support@multicharts.com.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 16 2015
by Henry MultiСharts
Please, Which is the keyboard shortcut to recenter the DOM ? I haven't found it
Thanks in advance
It's in the General category, not in the DOM category. Probably it should be replaced.
It's called DOM Auto Centering
We'll have that corrected.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 17 2015
by Henry MultiСharts
Here's something interesting, while the DOM high and low for the day read the entire day, globex + cash session, the volume profile only reads the cash session.
I like the idea of having an option for us to set what session template to apply to the volume profile in the DOM but where is that option if I want to see the entire day?
Hello arnie,
Please send us the export of instrument settings to
support@multicharts.com
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 17 2015
by arnie
I just confirmed that the DOM profile is "linked" with the default session template we use on the symbol.
If we use a ETH+ RTH session template we get the full day's range
If we use a RTH session template we get the cash/pit session range
Knowing this now I have opinion on it.
I see both pros and cons using the session templates this way so...
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 17 2015
by arnie
Here is another idea for the DOM
There's no need for those two side areas of the DOM to be so large. It's dead space occupying precious space on our screens.
Also, it would be nice we could adjust the size of the profile, making it narrower or wider.
If we put 3 DOM's side by side and we need to see all together, all that "dead space" it's quite troubling for the eyes.
Maximize space and display what it's really important to be seen is key, specially when we are dealing with numbers.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 17 2015
by Henry MultiСharts
Here is another idea for the DOM
There's no need for those two side areas of the DOM to be so large. It's dead space occupying precious space on our screens.
arnie, it's not a dead space. It's space for orders.
Also, it would be nice we could adjust the size of the profile, making it narrower or wider.
This is also something that we are looking into.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 17 2015
by Henry MultiСharts
I love the DOM center keyboard shortcut, especially the ability it has to center all open DOM's at the same time. It's a beautiful thing to watch
The same way we have that horizontal line in the DOM that marks the high and low for the day, is it possible to have it also to mark the center of the DOM?
It would be nice to have such line (with a different color) so we can easily see how prices move up or down since last center.
Thank you for your suggestion, but unfortunately that is not something that is in our to-do list at the moment.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 17 2015
by Henry MultiСharts
When I requested the right extension I was looking for something like we have in the Equidistant Channel. Otherwise we need to go, every day, to every single rectangle we have in the charts, access its properties, one by one, and move forward the End Date.
You can set the end point to a future date with ”Anchor to bars” disabled and the drawing will be auto-extended for you.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 18 2015
by CrazyNasdaq
In order to study this case please provide the following information:
- workspace you are using (both CQG and IQFeed);
- in QuoteManager right click on the custom futures->Export instruments (with data, including futures CF is built on)->export minute and daily data. Please export both CQG and IQFeed Custom futures;
- screenshot of CQG data feed settings (QuoteManager->Tools->Data sources->CQG->Settings.
- specify the time zone of your PC.
If the file size is >10 mb please upload it to any file sharing hosting and send me the download link to
support@multicharts.com.
I've sent the mail with the link to download the files and the infos you've requested
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 20 2015
by AlphaCat
Hello AlphaCat,
MultiCharts .NET 9.1 Beta 1 can be expected within a week.
Is this happening?
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 21 2015
by Henry MultiСharts
Hello AlphaCat,
MultiCharts .NET 9.1 Beta 1 can be expected within a week.
Is this happening?
We are going to have MultiCharts .NET 9.1 Beta 1 this week.
Re: Demo Data from AMP in MULTICHARTS 9.1 BETA 1
Posted: Jul 23 2015
by Ranfotto
Demo data access from AMP does not work with MC64 v9.1 beta1.
[07/13/2015 09:45:15] Establishing connection to CQG: Datafeed Version= 1.0.11373.201
[07/13/2015 09:45:17] Error message: Logon failed: Trader is not enabled to use WebApiTest client application. Please contact your FCM.
[07/13/2015 09:45:17] Lost connection to Data Network.
Hello swisstrader,
Since MultiCharts 9.1 beta 1 CQG connection works via WebApi.
Old
demo accounts created for COM API (which was used previously) will not work.
You need to contact your broker and request a new WebApi demo account.
Live accounts should work OK without any additional adjustments.
Please, could someone suggest me which is the DEMO CQG should I request to have WebApi working with Multicharts 9.1 beta 1 from this "infinite list" of platform request form AMP futures link:
http://www.ampfutures.com/platforms/
I've tried some of them but no one of which I've tried, works !!!
THANKS in advance
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 23 2015
by damnpenguins
Just installed the 9.1 beta 1 and its great so far. Thanks for the continued improvement of MC!
One (stupid) question....
The addition of a local sim broker is fantastic. I was of the impression that it would be possible to utilise the local sim in market replay, but it isn't.
Is there a technical issue or a specific reason that we can't utilise the sim broker to simulate trading via market replay?
In the deep dark recesses of my memory I think I remember there being some reason that was outlined in a PM request once....
thanks again.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 23 2015
by Henry MultiСharts
Just installed the 9.1 beta 1 and its great so far. Thanks for the continued improvement of MC!
One (stupid) question....
The addition of a local sim broker is fantastic. I was of the impression that it would be possible to utilise the local sim in market replay, but it isn't.
Is there a technical issue or a specific reason that we can't utilise the sim broker to simulate trading via market replay?
In the deep dark recesses of my memory I think I remember there being some reason that was outlined in a PM request once....
thanks again.
Hello damnpenguins,
Unfortunately current platform architecture does not provide possibility of implementing Playback Trading.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 23 2015
by damnpenguins
Thanks Henry, One final question if I could. I had a quick search for documentation regarding the new session functions in the beta release. is there any documentation on the wiki etc yet?
Re: Demo Data from AMP in MULTICHARTS 9.1 BETA 1
Posted: Jul 23 2015
by Henry MultiСharts
Please, could someone suggest me which is the DEMO CQG should I request to have WebApi working with Multicharts 9.1 beta 1 from this "infinite list" of platform request form AMP futures link:
http://www.ampfutures.com/platforms/
I've tried some of them but no one of which I've tried, works !!!
THANKS in advance
Hello Ranfotto,
You need to contact AMP futures directly for assistance. They do not yet have a web form for it.
Re: Demo Data from AMP in MULTICHARTS 9.1 BETA 1
Posted: Jul 23 2015
by CrazyNasdaq
Please, could someone suggest me which is the DEMO CQG should I request to have WebApi working with Multicharts 9.1 beta 1 from this "infinite list" of platform request form AMP futures link:
http://www.ampfutures.com/platforms/
I've tried some of them but no one of which I've tried, works !!!
THANKS in advance
Hello Ranfotto,
You need to contact AMP futures directly for assistance. They do not yet have a web form for it.
Me too I have tried on a second PC the CQG demo with AMP and Multicharts 9.1 beta1 and ask directly to the technical support for a WebApi demo but at the moment seems that there is no possibility to have a Demo working with new WebApi. The Demo login credential they gave me did not work at all. The Live account works perfectly
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 24 2015
by Henry MultiСharts
Thanks Henry, One final question if I could. I had a quick search for documentation regarding the new session functions in the beta release. is there any documentation on the wiki etc yet?
There is no documentation for these functions yet. Please email your specific question to
support@multicharts.com
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 24 2015
by SP
Could we get the same option to format the indicator before inserting into the scanner as we have for the charts?
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 27 2015
by AlphaCat
Hello AlphaCat,
MultiCharts .NET 9.1 Beta 1 can be expected within a week.
Is this happening?
We are going to have MultiCharts .NET 9.1 Beta 1 this week.
I suppose this is why most developer just say "When its done" instead of giving out a release date..
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 27 2015
by Henry MultiСharts
Could we get the same option to format the indicator before inserting into the scanner as we have for the charts?
Hello SP,
The "Format" option in the Insert Study is missing in the scanner window by design due to multiple reasons:
- you can add a study to an empty scanner window with no instruments;
- you can have the study in the scanner configured individually for each instrument;
- there is a "Format Study for all instruments" option.
You may want to submit a feature request with a detailed description of how you want the option to work to the Project Management of our web site so other users can vote for it:
https://www.multicharts.com/pm/
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 28 2015
by monexx
Hello,
MC9.1 beta1: problem loading volume profile for some instruments.
For example: Gold, Dollar Index, Japan Yen, Gas Oil, Dow Jones mini, Cocoa ...
Data source: CQG live
Attached screenshot:
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 29 2015
by Henry MultiСharts
I suppose this is why most developer just say "When its done" instead of giving out a release date..
MultiCharts .NET 9.1 Beta 1 is out now.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 29 2015
by Henry MultiСharts
Hello,
MC9.1 beta1: problem loading volume profile for some instruments.
For example: Gold, Dollar Index, Japan Yen, Gas Oil, Dow Jones mini, Cocoa ...
Data source: CQG live
Attached screenshot:
Hello monexx,
In MultiCharts please go to File->New->QuoteManager Window
In QuoteManager Window go to Tools->Data Sources->CQG->Settings->disable the option “Use External Data”.
Then close the QuoteManager and MultiCharts.
Make sure that no processes with MultiCharts in Description remain in Task Manager -> Processes (Win7) or Details (Win8) tab:
https://www.multicharts.com/trading-sof ... _Processes
After that is done please start MultiCharts.
You should be able to get the required data now.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 29 2015
by SP
Henry,
another question: the profiles have a very nice feature for displaying the text size using "Static Font" so that the text always adapts if the price or time scale shrinks or extends. Is there a way to make that available for the PLEditor too so you can use it for your own studies and text displays like text_setsize ( text, Static Font) ?
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 30 2015
by monexx
Hello,
MC9.1 beta1: problem loading volume profile for some instruments.
For example: Gold, Dollar Index, Japan Yen, Gas Oil, Dow Jones mini, Cocoa ...
Data source: CQG live
Attached screenshot:
Hello monexx,
In MultiCharts please go to File->New->QuoteManager Window
In QuoteManager Window go to Tools->Data Sources->CQG->Settings->disable the option “Use External Data”.
Then close the QuoteManager and MultiCharts.
Make sure that no processes with MultiCharts in Description remain in Task Manager -> Processes (Win7) or Details (Win8) tab:
https://www.multicharts.com/trading-sof ... _Processes
After that is done please start MultiCharts.
You should be able to get the required data now.
Thank you very much, now it loads the volume profiles.
I found one error:
Attached 2 screenshots:
On the right side I set volume profile for the last two sessions.
Ever after close of 15 min bar leads to flattening volume profile. (1.screenshot)
After the reload of data that shows properly. (2.screenshot)
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 30 2015
by Henry MultiСharts
Thank you very much, now it loads the volume profiles.
I found one error:
Attached 2 screenshots:
On the right side I set volume profile for the last two sessions.
Ever after close of 15 min bar leads to flattening volume profile. (1.screenshot)
After the reload of data that shows properly. (2.screenshot)
So the Volume Profile is flattening after each 15 min bar is closed? Are you able to easily replicate this behavior? If you are then please come to our live chat to demonstrate it.
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 30 2015
by Henry MultiСharts
Henry,
another question: the profiles have a very nice feature for displaying the text size using "Static Font" so that the text always adapts if the price or time scale shrinks or extends. Is there a way to make that available for the PLEditor too so you can use it for your own studies and text displays like text_setsize ( text, Static Font) ?
Unfortunately there is no such functionality at the moment. You may want to submit a feature request to the Project Management of our web site so other users can vote for it:
https://www.multicharts.com/pm/
Re: MULTICHARTS 9.1 BETA 1
Posted: Jul 31 2015
by monexx
Thank you very much, now it loads the volume profiles.
I found one error:
Attached 2 screenshots:
On the right side I set volume profile for the last two sessions.
Ever after close of 15 min bar leads to flattening volume profile. (1.screenshot)
After the reload of data that shows properly. (2.screenshot)
So the Volume Profile is flattening after each 15 min bar is closed? Are you able to easily replicate this behavior? If you are then please come to our live chat to demonstrate it.
Hello,
it seems that now it is fine.
The error is to feature two days but now it's OK. We'll see it later, I'm going to watch ...
Regards,
AB
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 04 2015
by arnie
In File -> Preferences -> Trading my currency options is set to EUR which would indicate that when I open OPT window my account balance would be in euros, correct?
What is happening though is that every time I open for the first time for the day the OPT window and then connect to my broker, my account balance is in dollars although there's no "$" symbol.
If I disconnect from the broker and reconnect than my account balance is in euros and the symbol "€" is now there.
Does anyone else is having the same reaction?
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 04 2015
by Henry MultiСharts
In File -> Preferences -> Trading my currency options is set to EUR which would indicate that when I open OPT window my account balance would be in euros, correct?
What is happening though is that every time I open for the first time for the day the OPT window and then connect to my broker, my account balance is in dollars although there's no "$" symbol.
If I disconnect from the broker and reconnect than my account balance is in euros and the symbol "€" is now there.
Does anyone else is having the same reaction?
We will have that fixed in MultiCharts 9.1 Beta 2.
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 05 2015
by MAtricks
The Portfolio Trader will not launch while MC is open in 9.1 beta 1.
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 06 2015
by Henry MultiСharts
The Portfolio Trader will not launch while MC is open in 9.1 beta 1.
Hello MAtricks,
If the process is running and the icon is present on the system task bar but you cannot see the portfolio window please do the following:
Please close all MCPortfolio.exe processes.
Start the Registry editor - go to Windows Start menu->Run->regedit.exe In the Registry editor go the following folder:
HKEY_CURRENT_USER\Software\TS Support\MultiCharts64 Delete MCPortfolio folder.
Start Portfolio Trader now.
If any error appears on start of Portfolio Trader - please attach a screenshot of the error you have and
send us the logs.
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 06 2015
by MAtricks
Sorry for not taking a screen shot of it. The error was that the TSServer process was already in use.
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 06 2015
by Henry MultiСharts
Sorry for not taking a screen shot of it. The error was that the TSServer process was already in use.
This message means that you have tried running MultiCharts components from different users. You need to run all components under the same user (as user or as admin).
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 06 2015
by MAtricks
I never changed anything on my end except for upgrading to 9.1 beta on this machine. The two worked well together before that.
Just checked. Sure enough, after the upgrade, MC was still set to run as Admin, but the Portfolio Trader had lost that setting in the upgrade process.
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 14 2015
by monexx
Hello,
I have trouble downloading data of Copper.
Attached screenshot:
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 14 2015
by Henry MultiСharts
Hello,
I have trouble downloading data of Copper.
Attached screenshot:
We will check that.
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 17 2015
by monexx
Hello,
I have trouble downloading data of Copper.
Attached screenshot:
We will check that.
Hello,
Today it working correctly.
Regards,
AB
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 17 2015
by mickatrade
Hello,
I use MC for US stock trading (interactive broker). I've 5 opened DOM in my workspace.
I use keyboard shortcuts to enter in position (at bid or ask depending the short or long position)
Today i've the price level frozen at 87.22$ no matter the current bid/ask for stock EL when i hit the shortcut.
I have no problem with other stocks .
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 17 2015
by Henry MultiСharts
Hello,
I use MC for US stock trading (interactive broker). I've 5 opened DOM in my workspace.
I use keyboard shortcuts to enter in position (at bid or ask depending the short or long position)
Today i've the price level frozen at 87.22$ no matter the current bid/ask for stock EL when i hit the shortcut.
I have no problem with other stocks .
Hello mickatrade,
Discussion Forum is a delayed response communication tool. Such case should be demonstrated remotely using the
Live Chat. In case this behavior reappears - please come to Live Chat. If you are able to easily replicate it - please let us know the steps to do that.
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 17 2015
by mickatrade
Thank you Henry,
I restarted MC, and everything was OK.
But it's annoying because it could end in bad fill price .
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 18 2015
by O66
Hi,
I did upgrade from 9.0 build 11210
Unfortunately i can't connect (CQG) and read only indicators aren't available anymore.
Im using windows 10.
What is it what im doing wrong?
Regards,
edit
Solved:
Since MultiCharts 9.1 beta 1 CQG connection works via WebApi.
Old demo accounts created for COM API (which was used previously) will not work.
You need to contact your broker and request a new WebApi demo account.
Live accounts should work OK without any additional adjustments from broker end.
As for the Multicharts configuration – you need to change the default demo server to the live one (wss://api.cqg.com:443).
You need to do that for both broker profile (MultiCharts->File->Broker Profiles->Manage->CQG->Edit) and data feed (QuoteManger->Tools->DataSources->CQG->Settings).
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 19 2015
by Henry MultiСharts
and read only indicators aren't available anymore.
This issue will be fixed in MultiCharts 9.1 Beta 2.
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 19 2015
by CrazyNasdaq
and read only indicators aren't available anymore.
This issue will be fixed in MultiCharts 9.1 Beta 2.
When Multicharts 9.1 beta 2 will be released?
Will it support CQG demo account as it was in previous release ? At the moment those who would like to test CQG with a demo account, can't do that with this new release 9.1
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 20 2015
by Henry MultiСharts
Will it support CQG demo account as it was in previous release ? At the moment those who would like to test CQG with a demo account, can't do that with this new release 9.1
You need to get a WEB API demo account from your broker to use the CQG demo connection. If your broker is having difficulties supplying it - please ask him to contact us directly.
You can also use your live account for data and the new Paper Trader prebuilt simulator for paper trading.
Re: MULTICHARTS 9.1 BETA 1
Posted: Aug 21 2015
by Henry MultiСharts