MULTICHARTS 12.0 RELEASE 2
Posted: Sep 14 2018
MultiCharts 12.0 Release 2 build 16868 is out now!
You can check the change log in our blog.
Go to download page
You can check the change log in our blog.
Go to download page
MultiCharts
https://www.multicharts.com/discussion/
https://www.multicharts.com/discussion/viewtopic.php?t=51628
You need to post your codes if you need coding help.Hello .
I´m trying to use command Arw_New and Text_new with Release 2 and Release 1 but is not working When I was using Beta Release was working.Using the same instrument and same study.
Code: Select all
if time=1700 and (Today_Julian =Data_Idx_Julian- Alert_Antecendencia) then begin
Arw_SetColor(Arw_New (JulianToDate (Data_Idx_Julian),1700,L*0.98, false),AtenColor);
if Text_Arrow_ON=1 then
text_setcolor(Text_new(JulianToDate (Data_Idx_Julian),1700,L*0.93, Text(DEMOSTRA_ITR_1, Data_Idx," em:",Alert_Antecendencia:3:0,"D")),AtenColor);
end;
I'm having problems installing 12.0 R2 on Windows Server 2016 and Windows Server 2012 R2.
On 2012 R2, I receive the attached 'Unknown Publisher' message. Selecting 'Run Anyway' does get to the next step but to be safe, I aborted at that point.
12-R2.GIF
On 2016, I don't get that far as nothing happens when I try to open the exe. I tried downloading it again - but it made no difference.
FWIW, 11.0 and 12.0 R1 installed without incident on both Servers
12.0 R2 does install on Windows 7 without any messages or issues during install. I pulled up some basic charts and all seemed to be OK there.
It does but it doesn't always display that message. In fact, with ALL the new installs I've ever done, I have never had that message appear.
Windows treats ALL new installs as 'Unknown Publisher' .
Look at the line after 'Unknown Publisher'
Do you see the "Application"?
Do you recognize the application?
It does but it doesn't always display that message. In fact, with ALL the new installs I've ever done, I have never had that message appear.
Thank you. I guess that’s a slight improvement over your usual patronizing drivel of which your previous reply was a prime example.
1.Have you done any Windows update?
2.Microsoft tightens the security continuously.
3.Please read and follow the instructions.
Thanks. That message and option only appears on the 2012 Server. If that had been the only problem with installing Release2, I probabaly wouldn't have mentioned it. However, I did point out that I don't even get as far as receiving that option on the 2016 Server.Just select 'Run Anyway', I've had to do that for several versions now.
It's not a problem or anything to worry about.
. . .
1.Have you done any Windows update?
2.Microsoft tightens the security continuously.
3.Please read and follow the instructions.
It may have escaped your notice that MC 12.0 has caused some people a few problems. Until now, I’ve been fortunate and haven’t experienced any but I thought it would be a good idea to report what did happen.
Is that OK with you for me to do that? Please let me know if it isn’t.
sameJust installed MC12r2 on Windows Server 2016.
Everything normal.
Alex
automaton, this fix is targeted to MultiCharts 12 Release 3.Post by automaton » 11 Aug 2018
"Henry. The above usability improvement worked smoothly in regards to utilizing CTRL+S and CTRL+P keyboard shortcuts, but it seems to have inadvertently created a new issue that didn't exist in the previous versions. Some sort of key lock on this little GUI box will not allow you to key your way forward using ENTER, or even the TAB key to try to access it. It rejects it, sounding a ring. Mouse clicking does work though."
Capture.png
Post by Henry MultiСharts » 13 Aug 2018
"automaton, thanks for letting us know, we will have it corrected."
Hi Henry. Not sure if your team planned on deferring this fix to a future release, but just wanted to let you know that the issue still exists with the 2nd release of MC 12.0. Take care bud
Meecc, thanks for pointing that out. We will have it corrected.Flush "Cached" Data Typo
strelow, it still works ok on our end, using the code you have provided and the one I have posted in reply to your previous post on this matter:If the codes run in other release I dont think this is a code problem .I think could be a new bug.
Part of code :Code: Select all
if time=1700 and (Today_Julian =Data_Idx_Julian- Alert_Antecendencia) then begin
Arw_SetColor(Arw_New (JulianToDate (Data_Idx_Julian),1700,L*0.98, false),AtenColor);
if Text_Arrow_ON=1 then
text_setcolor(Text_new(JulianToDate (Data_Idx_Julian),1700,L*0.93, Text(DEMOSTRA_ITR_1, Data_Idx," em:",Alert_Antecendencia:3:0,"D")),AtenColor);
end;
Are you able to get the drawings created by our simple example?strelow, it works OK on our end. Please check your code.comands : Arw_New ,Text_New not workingCode: Select all
if(mod(currentbar, 2) = 0) then text_new(date, time, high, "bar") else arw_new(date, time, low, true);
seneca, we have reworked the Historical Data controls in the Interactive Brokers data feed settings since some of the users found them unclear. An individual option “Request Historical ticks directly from API” is no longer there, instead of it we have added radio buttons that should not leave any room for confusion. Build Tick-based Bars Using: 1 Tick = Request Historical ticks directly from API.I can't find the “Request Historical ticks directly from API” option in the IB data feed settings in Quote Manager. Product Version is 12.0.16868.400. Am I missing something?
Please make sure your anti virus and firewall are disabled, close any applications running in the background, try changing the Path to the system Temp folder like described in the bottom part of this guide here. If this solution didn't help and you still have the issue-please come to our live chat Monday-Friday 6:30 am - 1 pm EST for the remote assistance.On 2016, I don't get that far as nothing happens when I try to open the exe. I tried downloading it again - but it made no difference
strelow, it still works ok on our end, using the code you have provided and the one I have posted in reply to your previous post on this matter:If the codes run in other release I dont think this is a code problem .I think could be a new bug.
Part of code :Code: Select all
if time=1700 and (Today_Julian =Data_Idx_Julian- Alert_Antecendencia) then begin
Arw_SetColor(Arw_New (JulianToDate (Data_Idx_Julian),1700,L*0.98, false),AtenColor);
if Text_Arrow_ON=1 then
text_setcolor(Text_new(JulianToDate (Data_Idx_Julian),1700,L*0.93, Text(DEMOSTRA_ITR_1, Data_Idx," em:",Alert_Antecendencia:3:0,"D")),AtenColor);
end;Are you able to get the drawings created by our simple example?strelow, it works OK on our end. Please check your code.comands : Arw_New ,Text_New not workingCode: Select all
if(mod(currentbar, 2) = 0) then text_new(date, time, high, "bar") else arw_new(date, time, low, true);
strelow, you need to configure the sessions the same way in both platforms you are running. Go to Format->Instrument->Settings tab->check which Session is selected for the chart.I created small system that reproduce the issue. I will send to you run in your computer. I use instrument PETR4.SA from free Quotes.
Create a chart on (Build 16374) and include this study after make same procedure using (Build 16868)
I very interresting situation if a use MSFT instruments from same free Quotes works for both releases . I think the problem is something dont recognize this line "if Time=1700" for this new release and for beta release works.
mickatrade, this is something we are going to add in one of the future versions.Hello,
I'd like to know if you'll add fxcm broker and datafeed in the next months .
The new API is available.
https://www.fxcm.com/uk/algorithmic-tra ... i-trading/
Thx,
MJ
kagein, we were unable to replicate this behavior on our end. If it happens on your end on a constant basis or you have the specific steps leading to it - please specify the steps, or capture a video demonstrating it, or come to the live chat to demonstrate it remotely.I found an issue, would like if someone else can confirm. When applying input combinations to a chart from the Strategy Optimization Report, the input values occupy the wrong inputs.
Example
I optimise inputs say: rsi , overbought, oversold and the highest net profit occurs at 14 , 70 , 30 respectively. Applied to a strategy with additional inputs, rsi is left with the default value, whilst overbought and oversold inputs have value of 14 and 70 respectively.
karlrb, thanks for reporting. We are currently analyzing this behavior.Only me got the problem about the performance graph of portfolio trade is not showing correct data. I have tried to reproduce the issue on a fresh install computer. version: 12.0.16868.400.
mickatrade, based on our analysis, FXCM's REST API is not stable yet. We will get back to adding support for it when the known issues of this API are ironed out. We do not have any information when it is going to be fixed by FXCM.That s good news.
Do you have an ETA?
Thx
MJ
ke45, thanks for reporting. We are going to have that fixed in the next update.I found two issues with new Kase Bar implementation. First, when building Kase Bars from minute data the realtime calculation will differ from bars that are build from historical data. Please have a look at the two charts, both have the same settings and data source, the right chart is calculated in realtime, while the left chart is the result after new loading from historical data:
http://prntscr.com/kx2qnu
The left chart looks correct, while the right chart (realtime calculation) has some strange overlapping of bars?
We do not disclose the source code of our Kase bars implementation.The second issue with Kase Bars is, I am missing the Kase template in Custom Resolutions Manager? Thank you for your support!
Code: Select all
Profit= GetPositionOpenPL(ContractName,AccountName);
NbShares= GetPositionQuantity(ContractName,AccountName);
Equity= GetRTAccountEquity(AccountName);
Equity= GetRTAccountEquity("A340747");
Smoky, there are no outstanding issues with the "Accounts and Positions" functions. The code you have provided is compiled without errors on our end. Please check your code.all functions "Accounts and Positions" seem to be buggy. I try :all return error code maybe i miss something...Code: Select all
Profit= GetPositionOpenPL(ContractName,AccountName);
NbShares= GetPositionQuantity(ContractName,AccountName);
Equity= GetRTAccountEquity(AccountName);
Equity= GetRTAccountEquity("A340747");
Smoky, you don't have the prebuild GetPositionOpenPL function in your editor anymore. This is clearly stated in the errors and you can see that the function name is grayed out in the code. Please find this function attached. Import it and compile your code.Hi Henry, sorry it's compilation error here you will find simple code to try getpositionopenpl.pla my error when compile
Smoky, you can find all prebuilt studies in the MultiCharts application folder (right click on the MC shortcut –> Properties –> "Shortcut" tab –> click "Open file location"). Run the all_studies.exe file, it will unpack the sef file with all studies that you can import.hi Henry,As you can see now it's working, good.Please can you do the same thing for all other functions in grey ?Many thanks
SP, this issue will be fixed in MultiCharts 12 Release 3. You need to add 127.0.0.1 to Trusted IP Addresses or check the "Allow connections from localhost only" box in IB TWS -> Configure -> API -> Settings, as a workaround.Since yesterday i get the error message on the QM that the TWS is out of date. If have the latest TWS Build 973.2h, Sep 25, 2018 12:05:32 PM installed.
Smoky, please send us the logs via MultiCharts->Help tab->Feedback (or Windows Start menu->All programs->MultiCharts64->Feedback) for analysis.ISSUE MC12 close existing order on your broker account when closing chart.
VERY simple to reproduce.
Open a chart and link it to your broker account, this chart don't have any strategy and you can see your order price and qty ok, all is good.
Close the chart, and then MC12 send order to close your position ...
You will see those closing order on MC12 side and on TWS side.
can't find workaround...
This issue will be fixed in MC 12 Release 3.kagein, we were unable to replicate this behavior on our end. If it happens on your end on a constant basis or you have the specific steps leading to it - please specify the steps, or capture a video demonstrating it, or come to the live chat to demonstrate it remotely.I found an issue, would like if someone else can confirm. When applying input combinations to a chart from the Strategy Optimization Report, the input values occupy the wrong inputs.
Example
I optimise inputs say: rsi , overbought, oversold and the highest net profit occurs at 14 , 70 , 30 respectively. Applied to a strategy with additional inputs, rsi is left with the default value, whilst overbought and oversold inputs have value of 14 and 70 respectively.
Smoky, this option is applicable to the auto trading only. Please send us the logs as requested above or come to the live chat to demonstrate this behavior remotely.Hi Henri,maybe i found something, with this setup, maybe MC close all position without stategy on chart...with IB client ID=0 MC have to make difference between outside orders (TWS) and orders made by MC stategy.