Using Alerts
Alert is a visual or/audio/e-mail notification triggered when the market conditions meet the criteria specified in the study. Audio/visual/e-mail alerts can be enabled simultaneously.
A check for the alert triggering conditions is performed whenever one of the following events occurs:
- Workspace is opened.
- Data series (symbol) is replaced with another data series (symbol).
- A bar is closed or a new tick is received.
Enabling Alerts
Alerts can be enabled from the Format Indicator window:
- Open the Format Indicator window.To open the Format Indicator window, position the mouse pointer over the indicator; double-click once the Pointer
changes into a Hand
.
The Format Indicator window can also be opened by one of the following methods:
- Position the mouse pointer over an indicator; once the Pointerchanges into a Hand
, right-click and then click Format Indicator Name
- Open the Format Objects window; in the Indicators tab, select an indicator and click the Format button. See Opening Format Objects Window.
Note: The Format Indicator window for the indicator being inserted will open automatically if the Format check box in the Insert Study window is checked. - Select the Alerts tab.
- Check the Enable Alerts check box to enable alerts; uncheck the box to disable the alerts.
Alert Conditions Check
You can elect whether to check for Alert Triggering Conditions every time a new tick is received, or only at the close of each bar.
Alert Conditions Check can be set from the Format Indicator window:
- Open the Format Indicator window.To open the Format Indicator window, position the mouse pointer over the indicator; double-click once the Pointer
changes into a Hand
.
The Format Indicator window can also be opened by one of the following methods:
- Position the mouse pointer over an indicator; once the Pointerchanges into a Hand
, right-click and then click Format Indicator Name
- Open the Format Objects window; in the Indicators tab, select an indicator and click the Format button. See Opening Format Objects Window.
Note: The Format Indicator window for the indicator being inserted will open automatically if the Format check box in the Insert Study window is checked. - Select the Alerts tab.
- In the Alert Conditions Check section click the On Bar Close, Every Tick or the Once Per Bar radio button, to select the alert triggering conditions to be checked at the close of each bar only, every time a new tick is received or every time a new tick is received once per bar only, respectively.
Audio Alerts
Alerts can be set from the Format Indicator window:
- Open the Format Indicator window.To open the Format Indicator window, position the mouse pointer over the indicator; double-click once the Pointer
changes into a Hand
.
The Format Indicator window can also be opened by one of the following methods:
- Position the mouse pointer over an indicator; once the Pointerchanges into a Hand
, right-click and then click Format Indicator Name
- Open the Format Objects window; in the Indicators tab, select an indicator and click the Format button. See Opening Format Objects Window.
Note: The Format Indicator window for the indicator being inserted will open automatically if the Format check box in the Insert Study window is checked. - Select the Alerts tab.
- Select the Audio Alert check box.
- Select the .wav sound file in the File field. Ding.wav is selected by default.
- Press the Play button to test the sound.
Visual Alert
Alerts can be set from the Format Indicator window:
- Open the Format Indicator window.To open the Format Indicator window, position the mouse pointer over the indicator; double-click once the Pointer
changes into a Hand
.
The Format Indicator window can also be opened by one of the following methods:
- Position the mouse pointer over an indicator; once the Pointerchanges into a Hand
, right-click and then click Format Indicator Name
- Open the Format Objects window; in the Indicators tab, select an indicator and click the Format button. See Opening Format Objects Window.
Note: The Format Indicator window for the indicator being inserted will open automatically if the Format check box in the Insert Study window is checked. - Select the Alerts tab.
- Select the Visual Alert check box.
- In the Display Notify Window for drop-down list, select the period of time for the alert message to be displayed.
External Alerts
To enable External Alerts click the Add button and select one of the external alert configurations.
To add a new external alert configuration:
- Click the gear icon next to the Add button.
- In the opened window configure the desired external alerts:
- Press OK.
- Click the Add button and select the newly added alert configurations.
E-mail Alert
E-mail alerts can be sent when market conditions meet your defined criteria.
This feature can be used to stay informed about market conditions while away from the computer.
To add alert to study:
- Make sure the study's PowerLanguage code contains alert code so that alerts will be triggered.
- Open the Format Indicator window.To open the Format Indicator window, position the mouse pointer over the indicator; double-click once the Pointer
changes into a Hand
.
The Format Indicator window can also be opened by one of the following methods:
- Position the mouse pointer over an indicator; once the Pointerchanges into a Hand
, right-click and then click Format Indicator Name
- Open the Format Objects window; in the Indicators tab, select an indicator and click the Format button. See Opening Format Objects Window.
Note: The Format Indicator window for the indicator being inserted will open automatically if the Format check box in the Insert Study window is checked. - Select the Alerts tab.
- Check Enable Alerts checkbox to enable alerts.
- Check the E-mail Alert checkbox.
- Press the Settings button. The E-mail Alert window will appear.
- Enter the email address of the sender.
- Enter the email address of the recipient. To send the email to multiple recipients, separate each email address with a semi-colon.
NOTE: verify that the email addresses in the Sender and Recipients sections are inserted correctly with no extra spaces before or after.
- Enter the SMTP Server Name or IP address, and Port number into the textboxes. Please get this information from your email provider.
- Check the SMTP Server authentication data checkbox if your SMTP server requires authentication to send emails. Enter the User name and Password.
- Press the Test button to send a test email.
- If the sending process has been successful a message will appear in the pop-up window
If the sending process has been unsuccessful a message will appear in the pop-up window: - Press OK to close the E-mail Alert window.
Example of Email Alert Message:
01.10.2008 17:48:50 (alert time and date)
Source: Bollinger Bands (study that triggered alert)
Symbol: ESZ8 (traded symbol name)
Resolution: 1 Tick Bar (resolution used)
Price: 1157.5000 (price value at the moment when defined conditions has been met)
Message: Price crossing over lower price band (message carrying information about the study condition that has been met)
Note: Not all e-mail service providers are supported. For instance, Office365.com accounts are not supported! E-mail alerts configuration should be tested prior to use.GMAIL E-mail Alert Settings
Configuration 1
Gmail SMTP server address: smtp.gmail.com
Gmail SMTP user name: Your full Gmail address (e.g. example@gmail.com)
Gmail SMTP password: A 16-digit app password generated in your Google Account as per the guide
Gmail SMTP port: 465
Gmail SMTP TLS/SSL required: yes (SSL)
Configuration 2
Gmail SMTP server address: smtp.gmail.com
Gmail SMTP user name: Your full Gmail address (e.g. example@gmail.com)
Gmail SMTP password: A 16-digit app password generated in your Google Account as per the guide
Gmail SMTP port: 587
Gmail SMTP TLS/SSL required: yes (TLS)
Since “Less secure apps access” was disabled by Gmail, it is required to configure the “App Password” for your Gmail account and use it in MultiCharts Email Alert settings. Please find more info about configuring “Sign in with App Passwords” here. Follow the instructions to generate the app password and insert it in the Password field in the Using section.
Using alerts in drawings
Drawings are intended to work with symbol data and they react to price changes. So alerts can be triggered only by the drawings applied to symbols. Drawings applied to indicators won’t give any alerts as long as indicators don't have prices, but only plots, so drawings can never cross a price and therefore no alerts will be triggered when drawings cross indicator plots.